Expandable SEG A Frames

A flexible display for changing spaces

Build a continuous branded display for exhibitions, showrooms and indoor promotions. Expandable aluminium A frame modules support printed fabric graphics with silicone edges for a neat finish.

Choose your package

Complete kits include the selected number of frame modules and two continuous printed fabric inserts, one for each side. Fabric only packages include two printed inserts and exclude hardware. Frame only packages include the selected number of modules without printed graphics.

Ten display widths

Select widths from 559mm to 5588mm, with a graphic height of 717mm. Wider packages use linked modules with continuous graphics across the display. Frame packages include a carry bag and folding legs with locks.

Replacement graphics

Refresh your message with replacement fabric inserts. Confirm compatibility before ordering for existing hardware. The silicone edge is 3mm thick and 13mm deep, intended for a compatible slot approximately 4.5mm wide and at least 14mm deep.

Artwork preparation

Supply artwork at the selected finished graphic size with 20mm bleed and keep important content at least 15mm inside the finished edge. Use CMYK, embed images and outline fonts. Aim for at least 130dpi at full size. Supply artwork for both sides.

Use and care

Recommended for indoor use. Wind can affect stability outdoors. Check that all modules and leg locks are secure before use. Need design help or advice on a configuration? Email info@thesignagecompany.com.au.